December 2007 Archives

Hanging Butterfly craft

Filed under Simple projects by

This was such an easy and fun project. I hung these from my daughters ceiling with fishing line and small hooks.

I would consider this craft to be fairly simple. These can be assembled with either a sewing machine, simple hand stitching or even hot glue. The felt squares can be purchased from your local craft store or Walmart. Each butterfly will be using two colored felt squares and one half of a black felt square and black pipe cleaners. Depending on the desired size, for a smaller butterfly you can use less felt.

For the shape of the wings and body, I simply drew out the patterns on a piece of paper. You will only need to draw out one wing and one body pattern and use them for both sides. After cutting out my paper patterns, I pinned them to my felt. For the wings, you will need to cut four felt pieces. For the body you will need to cut out two pieces. Laying the felt wings together, you can either hand stitch, machine sew or hot glue. I don’t recommend fabric glue, due to the fact that it takes time to dry and I’m a bit impatient. When assembling, remember to leave an opening to stuff the wings and body. After stuffing the wings and body, hand stitch or hot glue the opening closed.

To assemble the butterfly, simply hand stitch or hot glue the wings to the body. For the antennae, I took two pipe cleaners and poked them into the tip of the butterflies head. I rolled the ends of the pie cleaners for an extra touch.

To hang these adorable butterflies, I simply threaded fishing line in to the back of each butterfly. I cut the fishing line to the length I wanted and tied the end to a small hook. I threaded the hooks into the ceiling. These truly are adorable and they even cast cute shadows.

buttfly.jpg

butterfly.jpg

butterfly21.jpg

 

 

Supplies needed:

Reversable purse/tote bag

Filed under Sewing Crafts by

This is really two bags in one. Sometimes I find it difficult to find a bag I really like, making your own allows you to decide the color, shape and size.

I used coordinating denim and cotton fabric for these. Any fabric could be used, you may need a liner if using thin fabric. I would consider this project to be more difficult because sewing skills and a machine is needed.

I first drew out a pattern on craft paper, newspaper or tissue paper would work as well. I drew a square the shape and size I wanted my bag. I also drew a narrow rectangular shape the width I wanted my bag. This narrow rectangular piece is going to be the sides and bottom of the bag. You can either make three of these or one long one. If you choose to make one long piece, you need to make it long enough for the sides and bottom. This can be easily done by simply adding the length of both sides and bottom and drawing the piece that size. You will also need to draw out a narrow strip for the strap and any pockets that you would like to add as well as a skinny strip for the tie enclosure. For an extra embellishment, a narrow piece about 1 inch thick and the length of the sides and bottom and can be cut out, for piping.

After cutting out your pattern, pin the paper to your fabric. For the back and front of the bag, you will need to cut two pieces of fabric. For the bottom and sides, you will need to cut three, unless you decide to use one piece for all three. You will need to cut two for the strap and tie. For any pockets, cut as many pockets as you want on or in your bag. If you chose to use piping, cut only one piece of fabric. If using two different fabrics, you simply repeat the above for the coordinating fabric. You will not need to cut any fabric for the ties, only cut two ties in what ever fabric you choose. If you chose to use only one fabric for the project, you need to double all of the pieces except for the tie, when cutting them out. After you have all your pieces cut out, it’s time to sew.

Before you assemble the bag, add pockets, if any to the square pieces that will make up the front and back of your bag. Before sewing the pockets to the bag, it’s best to hem the top of the pocket first. Fold the fabric of the pockets and pin them to the desired placement you would like them to be. Stitch the sides and bottom of the pocket to the front and back pieces.
When sewing, remember to stitch pieces with pattern side against each other so when you turn it inside out the pattern will be on the outside. If you have decided to use three individual pieces for the sides and bottom, it may be best to stitch the ends together before sewing them to the front and back of the bag. Stitch the sides and bottom to each side of the front and back pieces of the bag. For the straps of the bag, take one strip of each coordinating fabric, place them together, pattern side in, making sure they are lined up. Stitch the straps down each side. When finished sewing, turn them right side out . For the tie enclosure, fold the fabric on half, tucking in any raw edges and simply sew them together. Repeat with the coordinating fabric.
When both pieces are done, it’s time to assemble the bag. To assemble these pieces, you need to turn one of them inside out. You should have one piece with the finished side showing and the other with the raw stitches showing. Take the piece that is inside out and place it inside of the other piece. Match up the corners and make sure it’s a good fit. Looking at the bag, there should be only the finished sides exposed. Fold the tops of the bag over making sure there are no raw edges exposed. Make sure the inside and outside pieces are lined up. Pin the two pieces together. Before sewing these two pieces, you need to attach the straps and ties. Pin the straps and ties where you would like them, making sure they line up with each other.
Now it’s time to finish your bag. Sew the two pieces of the bag together at the top. Knot and cut any loose threads and your bag is done. Simply turn the bag inside out and you have a whole new look. This bag can go from casual day to a dressed up evening, just by turning it side out.

tote12.jpg

tote21.jpg

Supplies needed: